How to Pressure Clean Exposed Aggregate in Mornington
Exposed aggregate is a popular finish for driveways, paths and outdoor entertaining areas across the Mornington Peninsula. Its textured surface provides grip, but the spaces between stones can trap dirt, leaf stains and organic growth. Coastal salt deposits and shaded, damp conditions can also affect its appearance. Effective pressure cleaning removes contamination without loosening stones, damaging the cement matrix or stripping an existing sealer.
Check the Surface Before You Start
Inspect the aggregate for cracks, loose stones, crumbling patches and peeling sealer. Pressure cleaning can worsen existing damage, so arrange repairs before treating compromised areas. If the concrete is newly installed, follow the installer’s curing and cleaning instructions rather than pressure washing it immediately.
Check whether the surface is sealed and identify the sealer if possible. Some coatings are vulnerable to strong chemicals and concentrated water pressure. Always test your cleaning method on a small, inconspicuous section first.
Prepare the Area and Control Runoff
Sweep away sand, leaves and loose grit. Move furniture and vehicles, protect electrical fittings, and keep children and pets away from the work area. Wear enclosed, slip-resistant footwear, eye protection and any additional protective equipment required by the cleaner’s label.
Do not allow dirty wash water, detergent, sediment or sealer residue to enter stormwater drains. Mornington’s stormwater network can carry pollutants towards local waterways and Port Phillip Bay. Plan containment and collection before starting, using suitable drain protection and wet-vacuum recovery where necessary. Check current EPA Victoria and Mornington Peninsula Shire guidance for disposal requirements; do not assume a product labelled biodegradable is safe to discharge.
How to Pressure Clean Exposed Aggregate Safely
- Choose a suitable cleaner. Use a product labelled for exposed aggregate and compatible with any existing sealer. Follow its dilution, application and safety instructions. Avoid acid washing as a routine cleaning method because acid can attack the cement around the stones.
- Pretreat stubborn contamination. Apply a compatible degreaser to oil marks or an appropriate treatment to algae. Agitate with a stiff nylon brush where suitable. Observe the recommended dwell time and do not let the cleaner dry on the surface.
- Start with gentle pressure. Fit a wide fan nozzle, such as a 25-degree or 40-degree tip, and begin at the lowest effective pressure. Start approximately 30–50 centimetres from the surface, then assess the test patch before adjusting. There is no single safe pressure setting for every aggregate finish.
- Clean in controlled passes. Keep the nozzle moving, maintain a consistent distance and overlap each pass slightly. Avoid directing the jet into cracks, joints or weakened edges. Never use a zero-degree jet; aggressive rotary nozzles can also damage the surface.
- Rinse and recover the wastewater. Work in manageable sections and rinse before loosened dirt dries back onto the aggregate. Keep runoff contained and collect it for appropriate disposal.
Should You Use a Surface Cleaner?
A compatible surface-cleaning attachment can produce a more even finish on larger driveways. However, it can still damage aggregate if its operating pressure, nozzle configuration or movement speed is unsuitable. Test it first and avoid pausing over one spot.


Drying, Sealing and Ongoing Maintenance
Allow the surface to dry before assessing the result. Pressure cleaning does not automatically mean resealing is necessary. If the coating is worn or patchy, seek advice about preparation and a compatible replacement rather than applying another layer over a failing finish.
Before sealing, follow the manufacturer’s moisture, temperature and rain-free curing requirements. Mornington Peninsula weather can change quickly, so choose a suitable forecast window. Ask about slip resistance, particularly on sloping driveways, steps and pool surrounds, as some sealers become slippery when wet.
Regular sweeping, prompt spill removal and periodic gentle washing help reduce the need for aggressive cleaning.
When to Call a Mornington Peninsula Professional
Professional cleaning is worthwhile for extensive algae, persistent oil stains, unknown sealers or surfaces near stormwater drains. Choose a local contractor who explains their test-patch process, pressure controls and https://juliusselq792.summitviewdaily.com/posts/soft-washing-explained-gentle-care-for-fragile-finishes wastewater recovery method. The right approach prioritises the condition of your aggregate—not simply the highest available pressure.
Mornington Peninsula Pressure Washing
(03) 8686 8331